Dr. Eunhye Kim

Assistant Professor

Phone: 303-273-3428
Office: BB 214
E-mail: ekim1@mines.edu

 

ACADEMIC APPOINTMENT & RESPONSIBILITIES

2015-Present: Colorado School of Mines
Assistant Professor, Department of Mining Engineering

Courses include:

MNGN408A – Underground Design and Construction
MNGN 404 – Tunneling
MNGN 504 – (Advanced) Tunneling

 

2011–2015 : University of Utah, Salt Lake City, UT
Assistant Professor

Courses taught at University of Utah:

MG EN 5160 Rock Mechanics Applications
MG EN 5150-01 Mechanics of Materials lecture
MG EN 5980 Rock Mechanics1 Lab
MG EN 5290 Introduction to Finite Element and other Numerical Models in Geomechanics
MG EN 5040 Engineering Design
MG EN 3010 Introduction to Mining Engineering
MG EN 3015 Mine Visits
MG EN 4990 Mining Seminar
MG EN 5980 Special Topics
MG EN 5970 Intern Program
MG EN 6900-7 Advanced Rock Mechanics
MG EN 6900-11 Special Topics
MG EN 6290 Introduction to Finite Element and other Numerical Models in Geomechanics

 

RESEARCH INTERESTS

Fracture behavior of rock
Rock fracture processes during rock cutting
Stability of geostructures (mining and civil applications)
Data enabled science for underground construction and tunneling engineering

 

Recent RESEARCH PROJECTS

Ground control capacity building, NIOSH (co-PI)                                                                  Sept. 2016
Hecla #4 shaft numerical analysis, Hecla Mining Company (co-PI)                                 Nov. 2016
Hecla #4 shaft data analysis, Hecla Mining Company (Leading PI)                                 Jun. 2016
Slope stability (Sunrise pit), CS Mining (Leading PI)                                                            Jun. 2014
Precursors of Spark mitigation in Mines, Illinois Clean Coal Institute (Leading PI)       Apr. 2013
Slope stability (Bawana and Hidden Treasure pits), CS Mining (Leading PI)                 Jan. 2013
Noise and dust research of PDC roof bolting cutters, US Synthetic (Leading PI)          Nov. 2012

 

RESEARCH AND WORK EXPERIENCE IN ACADEMIA AND INDUSTRY

2015–present: Assistant Professor, Colorado School of Mines, Golden, CO

2011–2015: Assistant Professor, University of Utah, Salt Lake City, UT

2011: Research Analyst, Independent Project Analysis Inc., Ashburn, VA

2011: Postdoctoral Researcher, PSU, University Park, PA

2008­­–2011: Conical Bit rotation with Kennametal Inc., Latrobe, PA

2007–2008: NASA project: Low–energy consumption machine with Orbitec Inc.

2004–2011: Rock mechanic tests for several industry projects (SNU and PSU)

2004: Pre-Blasting Report in Ulsan w/Korea Gas Cooperation & Exploration Company

2003: Experiment assistant in the geotechnical laboratory (AU, one semester)

 

TEACHING EXPERIENCE

2015–present: Assistant Professor, Colorado School of Mines, Golden, CO

2011­–2015: Assistant Professor, University of Utah, Salt Lake City, UT

2004–2011: Teaching Assistant, Rock Mechanics class (SNU and PSU: 2 and 3 semesters, respectively)

2008: Voluntary Teacher of 2008 summer school program in College of Earth and Mineral Science (8 weeks, PSU)

2005: Teacher & Assistant for creating a text book: (3.2 months, SNU)

 

EDUCATION

Ph.D. 2010, Energy and Mineral Engineering, Penn State University (PSU), UP, USA
Topic: Drilling optimization in application of conical bits

Ph.D. minor, Engineering Mechanics, Penn State University, UP, USA

M.S. 2006, Civil, Urban & Geo-system engineering, Seoul National University (SNU), S. Korea
Topic: An investigation of hydraulic aperture evolution by flow through test for circular shearing

B.S. 2003, Civil Engineering and Computer Science (dual), Ajou University (AU), S. Korea
Topic: Geotechnical aspects of tunneling

 

PROFESSIONAL CERTIFICATIONS

2015 - Professional Engineer (Civil: Geotechnical, Colorado and Utah)

2010 - Engineer In Training (Fundamentals of Engineering (FE), Pennsylvania)

2006 - Engineer In Training (two FE in Civil Engineering and Computer Science, S. Korea)

 

PROFESSIONAL AFFILIATIONS

2014–present: Future Leaders of American Rock Mechanics Association (ARMA)

2014–present: Organizing member of 2015 Artic Technology Conference (ATC)

2013–present: Society of Experimental Mechanics (SEM)

2012–present: Committee of Offshore Technology Conference (OTC)

2012–present: Young Leader Committee (YLC) in SME

2008–present: Society of Mining, Metallurgy, and Exploration (SME)

2008–present: American Rock Mechanics Association

2008–present: Underground Construction Association (UCA)

2008–present: International Society of Rock Mechanics (ISRM)

2008–present: American Society of Civil Engineer (ASCE)

 

HONORS & AWARDS

2014 - First Paper Award in International Conference Advanced Engineering and Technology in Incheon, South Korea

2014 - Future Leader in the American Rock Mechanics Association (ARMA)

2013 - Young Leader Committee in the Society of Mining, Metallurgy and Exploration (SME)

2010 - Reg. Hardy Memorial Award for Excellence in Mining, PSU

2008–2010 - Research Assistantship, PSU

2008 - Outstanding participant award in the 2008 Summer Experience in EMS, PSU

2007 - Scholarship award from University Office of Global Programs, PSU

2004 - Lee Hi-Keun Scholarship award, SNU, South Korea

1999 - Scholarship award for outstanding students, AU, South Korea

 

PROFESSIONAL COMMUNITY SERVICE

 

2016 – Reviewer for Geo-risk conference 2017

2015 - Reviewer of World Tunneling Conference 2016

2015 - Session chair, 2015 ICAMSME conference, Incheon, S. Korea

2015 - NSF grant reviewer

2015 - Reviewer of 49th ARMA conference, San Francisco, CA

2015 - Reviewer of 2015 Artic Technology conference, Copenhagen, Denmark

2015 - Session chair, 2015 SME annual conference, Denver, CO

2014 - Session chair, 2014 SEM annual conference, Greenville, SC

2014 - Session co-chair, 2014 SME annual conference, Salt Lake City, UT (session merged)

2014 - Reviewer of Air Force Summer Faculty Fellowship Program

2013 - NSF Graduate Fellowship committee

2013–2015 - Faculty advisor, ARMA student chapter in University of Utah

2013–present - Reviewer of Ocean Technology Conference

2013 - Reviewer of 47th ARMA conference, San Francisco, CA

 

INVITED TALKS

 

“Excellence in Geomechanics and Geostructure”, Seoul National University, S. Korea        June, 2015

“Cutting behavior of conical bits and rock mechanics at the U of U”, March UT local Section SME meeting, Midvale, UT, USA      Nov., 2012

 

RECENT PUBLICATIONS

 

Journal (SCI) papers

Kim, E.† and H. Changani (2016) Effect of water saturation and loading rate on the mechanical properties of Red and Buff Sandstones. International Journal of Rock Mechanics and Mining Sciences. 88:23-28.
Kim, E.† (2015) Effect of skew angle on main precursor of frictional ignition in bench-scale simulation of excavation processes International Journal of Rock Mechanics and Mining Sciences 80:101–106.
Kim, E.† and H. Changani (2015) Study of dynamic mechanical behavior of aluminum 7075-T6 with respect to diameters and L/D ratios using Split Hopkinson Pressure Bar (SHPB) Structural Engineering and Mechanics 55(4): 857-869.
Schumacher, F. P. and E. Kim† (2014) Evaluation of directional drilling implication of double layered pipe umbrella system for the coal mine roof support with composite material and beam element methods using FLAC3D Journal of Mining Science 50(2): 336–349.
Schumacher, F. P. and E. Kim† (2013) Modeling the pipe umbrella roof support system in a Western US underground coal mine International Journal of Rock Mechanics and Mining Sciences 60: 114-124.
Kim, E.†, J. Rostami† and C. Swope (2012) Full scale linear cutting experiment to examine conical bit rotation Journal of Mining Science 48(5): 882-895.
Kim, E.†, J. Rostami†, C. Swope and S. Colvin (2012) Study of conical bit rotation using full-scale rotary cutting experiments Journal of Mining Science 48(4): 717-731.

 

Peer-reviewed papers

Kim, E.† and D. Batos (2016) The Water Saturation Effects on Dynamic Tensile Strength in Red and Buff Sandstones Studied with Split Hopkinson Pressure Bar (SHPB), In 2015 International Conference on Advanced Materials, Structures and Mechanical Engineering 165-168.
Sieter, J., M. Smith, E. Kim†, and S. Cox (2015) Dust and Noise Hazard Exposure: Comparison of PDC vs. WC Roof Bolt Bits in Laboratory Mining Engineering 67(2): 28–33.
Kim, E.† and D. Batos (2015) The effects of water saturation on dynamic mechanical properties in red and buff sandstones having different porosities studied with Split Hopkinson Pressure Bar (SHPB) Applied Mechanics and Materials 752: 784-789 (received First Paper Award).
Changani, H., A. Young, and E. Kim† (2013) Effect of L/D ratio on dynamic response of aluminum 7076 and the natural motoqua quartzite sandstone in Saint George, UT using Split Hopkinson Pressure Bar (SHPB), In the 47th U.S. Rock Mechanics Symposium, San Francisco, June, 2013.
Kim, E.† and S. Colvin (2012) A preliminary full scale cutting test to find pre-cursor parameters of frictional ignition, In the 14th US Mine Ventilation Symposium, University of Utah, Salt Lake City, UT.
Kim, E.†, J. Rostami† and C. Swope (2010) Full scale linear cutting test to study rotation of conical bit, In the 44th U.S. Rock Mechanics Symposium, June, 2010.
Kim, E.†, J. Rostami† and C. Swope (2009) Measurement of conical bit rotation, In the 43th U.S. Rock Mechanics Symposium, June, 2009.
Kim, E.†, J. Rostami, C.-i. Lee and Y.-y. Jeong (2008) An investigation of hydraulic aperture evolution by flow through test for circular shearing using laboratory experiments and numerical simulation, In International Society for Rock Mechanics (ISRM) International Symposium 2008 and the 5th Asian Rock Mechanics Symposium, 24-26 November 2008 Tehran, Iran.
Jeong, Y.-y., E. Kim and C.-i. Lee† (2006) Hydromechanical behavior of rock joints by rotary shear-flow test, In Rock Mechanics in Underground Construction: ISRM International Symposium 2006: 4th Asian Rock Mechanics Symposium, 8-10 November 2006, Singapore.

 

Conference abstracts and presentations[1]

Kim, E.†. Effects of skew angle on cutting tool temperature increment, wear, and performance. In the SME 2017 annual Meeting, Denver, Colorado, Feb. 21, 2017
Kim, E.† and A. Garcia. The changes of fragmentation and energy absorption of Read, Berea and Buff sandstones along loading rates and water content. In the SME 2016 annual Meeting, Phoenix, Arizona, Feb. 22, 2016
Kim, E.†, K. Erikson, and H. Changani. Comparison between Dynamic Responses of Rhyolite and St. George Sandstone Using Split Hopkinson Pressure Bar Machine. In the 2014 Society of Experiment Mechanics annual conference, Greenville, SC, June 2014.
Kim, E.†, J. Sieter, M. Smith, and S. Cox. Dust and noise hazard exposure: comparison of PDC vs. WC roof bolt bits in laboratory. In the SME 2014annual Meeting, Salt Lake City, Utah, Feb. 26, 2014
Kim, E.†, M. McCarter, DS. Kim, and J. Donovan. Innovative way to evaluate probability of slope failure using three different methods: traditional geological survey, photogrammetry, and three-point method. In the SME 2014 annual Meeting, Salt Lake City, UT, Feb. 25, 2014
Kim, E. and J. Rostami. The Mechanical Cutting Behavior of a Conical Bit for Optimizing its Performance. In the SME 2012 meeting, Seattle, WA, February, 2012
Kim, E., J. Rostami, and C. Swope. Rotation of conical bit: experiments and simulation. In the SME 2010 annual Meeting, Mar. 3, 2010

 

† This symbol indicates the corresponding author.

[1] Some abstracts of the refereed papers were presented during conferences.

 

† This symbol indicates the corresponding author.

 

[1] This section includes some refereed papers’ abstracts, which were presented during conference periods.

© 2017 Colorado School of Mines | | Equal Opportunity | Privacy Policy | Directories | Text Only | Mines.edu | rss

 
Last Updated: 08/04/2017 08:23:15